کدهای خطای MID 136

There's a break in the wiring between the control unit and the ABS valve; the ABS valve is faulty. Check the wiring and connector contacts, replace the ABS valve, or, as a last resort, replace the control unit.

The wiring insulation or contacts in the connectors between the control unit and the ABS valve are damaged, the ABS valve is faulty, or the control unit is faulty. Check the wiring and contacts in the connectors, check the ABS valve. If the valve and wiring are normal, replace the control unit.

The wiring or contacts in the connectors between the control unit and the ABS valve are damaged, the control unit is faulty, or the ABS valve (air intake valve) is faulty. Check the wiring and contacts in the connectors, check the ABS valve. If the valve and wiring are normal, replace the control unit.

The ABS valve was activated and remained open for too long. Check the ABS solenoid valve.

Short circuit between battery positive and wires, damaged wiring or contacts in the connectors between the control unit and the ABS valve, or faulty control unit. Check the wiring and contacts for shorts. Clear fault codes. As a last resort, replace the control unit.

Short circuit to negative in the wiring, damaged wiring or contacts in the connectors between the control unit and the ABS valve, faulty ABS valve, faulty control unit. Check the wiring and contacts for shorts. Clear fault codes. As a last resort, replace the control unit.

There's a break in the wiring between the control unit and the ABS valve; the ABS valve is faulty. Check the wiring and connector contacts, replace the ABS valve, or, as a last resort, replace the control unit.

The wiring insulation or contacts in the connectors between the control unit and the ABS valve are damaged, the ABS valve is faulty, or the control unit is faulty. Check the wiring and contacts in the connectors, check the ABS valve. If the valve and wiring are normal, replace the control unit.

The wiring or contacts in the connectors between the control unit and the ABS valve are damaged, the control unit is faulty, or the ABS valve (air intake valve) is faulty. Check the wiring and contacts in the connectors, check the ABS valve. If the valve and wiring are normal, replace the control unit.

The ABS valve was activated and remained open for too long. Check the ABS solenoid valve.

Short circuit between battery positive and wires, damaged wiring or contacts in the connectors between the control unit and the ABS valve, or faulty control unit. Check the wiring and contacts for shorts. Clear fault codes. As a last resort, replace the control unit.

Short circuit to negative in the wiring, damaged wiring or contacts in the connectors between the control unit and the ABS valve, faulty ABS valve, faulty control unit. Check the wiring and contacts for shorts. Clear fault codes. As a last resort, replace the control unit.

There's a break in the wiring between the control unit and the ABS valve; the ABS valve is faulty. Check the wiring and connector contacts, replace the ABS valve, or, as a last resort, replace the control unit.

The wiring insulation or contacts in the connectors between the control unit and the ABS valve are damaged, the ABS valve is faulty, or the control unit is faulty. Check the wiring and contacts in the connectors, check the ABS valve. If the valve and wiring are normal, replace the control unit.

The wiring or contacts in the connectors between the control unit and the ABS valve are damaged, the control unit is faulty, or the ABS valve (air intake valve) is faulty. Check the wiring and contacts in the connectors, check the ABS valve. If the valve and wiring are normal, replace the control unit.

The ABS valve was activated and remained open for too long. Check the ABS solenoid valve.

Damaged or shorted wiring, faulty control unit. Check the ground wire from the ABS valves to the control unit for a short, and clear any fault codes.

Damaged or shorted wiring, faulty ABS valve, faulty control unit. Check the ground wire from the ABS valves to the control unit for a short, and clear any fault codes.