کدهای خطای MID 185

Incorrect checksum value at startup. Parameters in the dehumidifier control unit are incorrectly programmed. Try resetting the MID185. Reprogram it.

There's an internal fault in the air dryer control unit. Try resetting the MID185. Reprogram it. If the fault persists, replace the air dryer.

Incorrect checksum value at startup. Parameters in the dehumidifier control unit are incorrectly programmed. Try resetting the MID185. Reprogram it.

There's an internal fault in the air dryer control unit. Try resetting the MID185. Reprogram it. If the fault persists, replace the air dryer.

There's an internal fault in the air dryer control unit. Try resetting the MID185. Reprogram it. If the fault persists, replace the air dryer.

There's an internal fault in the air dryer control unit. Try resetting the MID185. Reprogram it. If the fault persists, replace the air dryer.

There's an internal fault in the air dryer control unit. Try resetting the MID185. Reprogram it. If the fault persists, replace the air dryer.

There's an internal fault in the air dryer control unit. Try resetting the MID185. Reprogram it. If the fault persists, replace the air dryer.

There's an internal fault in the air dryer control unit. Try resetting the MID185. Reprogram it. If the fault persists, replace the air dryer.

There's an internal fault in the air dryer control unit. Try resetting the MID185. Reprogram it. If the fault persists, replace the air dryer.

There's an internal fault in the air dryer control unit. Try resetting the MID185. Reprogram it. If the fault persists, replace the air dryer.

The dehumidifier control unit's internal temperature sensor signal is outside acceptable limits. The dehumidifier control unit is faulty. Replace the dehumidifier.

The unit temperature is below -48°C (-48°F) or above +93°C (203°F). This could be due to extreme weather conditions or a faulty temperature sensor. Restart the MID185 at an ambient temperature of 20°C (68°F). If the code remains active, replace the air cleaner.

The signal coming from the engine control unit (MID128) is incorrect or absent. The data link wiring is broken or partially damaged. The contacts in the connectors are damaged or corroded. The engine control unit may be faulty.

The pressure in the parking brake circuit increases, even with the solenoid valve activated. Air is entering from the trailer circuit or the air dryer is faulty. Try completely draining and filling the pneumatic system. Try resetting the MID185.

The parking brake circuit is not fully charged within a specified period of time. The parking brake or trailer circuit lines are leaking or partially clogged. Try completely draining and filling the air system. Try resetting the MID185.

The air pressure in the parking brake or trailer circuit is below 4.5 bar at speeds above 10 km/h. The lines in the parking brake or trailer circuit are leaking or partially clogged. Try completely bleeding and filling the air system. Try resetting the MID185.

The signal coming from the vehicle control unit (MID144) is incorrect or missing. The SAE J1587/J1708 data link wiring is broken or partially damaged. The connector contacts are damaged or corroded. The vehicle control unit may be faulty.

The pressure in the front circuit is above 14 bar at speeds exceeding 10 km/h. The air dryer is faulty. Try completely draining and filling the pneumatic system. Try restarting the MID185.

The pressure in the front circuit is below 4.5 bar at speeds exceeding 10 km/h. The front circuit components are leaking or partially clogged. Try resetting the MID185.

The air pressure in the rear circuit is 1.5 bar too high. Automatic shut-off pressure is exceeded. The air dryer is faulty. Try completely draining and filling the pneumatic system. Try resetting the MID185.

The pressure in the rear circuit is below 4.5 bar at speeds exceeding 10 km/h. The rear circuit components are leaking or partially clogged. Try resetting the MID185.

Internal fault in the air dryer control unit.

Replace the air dryer.

Internal fault in the air dryer control unit.