دزدگیر امنیتی
قطعه یا پارامتر: Program memory.
داده نادرست، نامنظم یا متناوب است.
متن فنی اصلی برای تطبیق دقیق
Software failure or electromagnetic interference.
فهرست کدها و توضیحات فارسی یونیت MID 214 در خودروهای سنگین ولوو و رنو تراکس
قطعه یا پارامتر: Program memory.
داده نادرست، نامنظم یا متناوب است.
Software failure or electromagnetic interference.
قطعه یا پارامتر: Control unit.
خرابی واحد یا قطعهٔ هوشمند.
Software failure or electromagnetic interference.
قطعه یا پارامتر: Motion sensor.
حالت یا عملکرد مورد انتظار قابل شناسایی نیست.
Motion sensors are covered by foreign objects, there is a break or short circuit in the sensor wires, contacts in the connectors are oxidized, or the motion sensor is faulty.
قطعه یا پارامتر: Siren.
نرخ بهروزرسانی داده غیرعادی است.
The connection between the unit and the siren is broken. The siren is not connected, the wires are broken or shorted, or the contacts in the connectors are corroded or damaged. The siren may be faulty.
قطعه یا پارامتر: Siren.
خرابی واحد یا قطعهٔ هوشمند.
The alarm control unit detected a fault in the siren. The siren failed due to mechanical damage or environmental influences. The battery inside the siren may be faulty.
قطعه یا پارامتر: Starter relay (K03).
ولتاژ مدار پایین است یا اتصالکوتاه به زمین وجود دارد.
Short circuit of the wire between the relay and the alarm control unit to ground.
قطعه یا پارامتر: Door lock control unit.
خرابی واحد یا قطعهٔ هوشمند.
Loss of contact between the alarm control unit and the door lock control unit. Short circuit between the units to power or ground. Broken wires between the units, or a faulty door lock control unit.
قطعه یا پارامتر: PSID 4
برای عیبیابی، دستورالعمل ویژهٔ سازنده لازم است.
قطعه یا پارامتر: PSID 1
برای عیبیابی، دستورالعمل ویژهٔ سازنده لازم است.
قطعه یا پارامتر: PSID 12
برای عیبیابی، دستورالعمل ویژهٔ سازنده لازم است.
قطعه یا پارامتر: PSID 2
برای عیبیابی، دستورالعمل ویژهٔ سازنده لازم است.
قطعه یا پارامتر: PSID 9
سامانهٔ مکانیکی به فرمان پاسخ درست نمیدهد یا از تنظیم خارج است.
قطعه یا پارامتر: PSID 5
برای عیبیابی، دستورالعمل ویژهٔ سازنده لازم است.
قطعه یا پارامتر: PSID 3
برای عیبیابی، دستورالعمل ویژهٔ سازنده لازم است.
ترجمه تأییدشده به فارسی نمایش داده میشود. در موارد در حال بررسی، شرح دقیق FMI و متن اصلی برای جلوگیری از ترجمه نادرست ارائه میشود.