کدهای خطای MID 216

The LCM cannot communicate with other modules via the SAE J1939 data link. The data link wiring is broken or partially damaged. The data link wires are shorted to ground or to a higher voltage. The LCM may be faulty.

The LCM unit cannot use its software. Reprogram it.

The LCM control unit cannot identify the information received via the SAE J1708 data link. Incorrect messages from other control units. Check fault codes in other control units.

Short circuit of the data channel wiring between the LCM unit and other units to a higher voltage.

Short circuit of the data channel wiring between the LCM unit and other units to ground.

Broken data channel wiring between the LCM unit and other units.

The data link inside the engine control unit is faulty. There is an internal fault in the unit. Replace the control unit.

Software malfunction. Reprogram the control unit.

Internal LCM malfunction. Try disconnecting the battery power for at least 15 seconds and reprogramming the LCM. If the malfunction persists, replace the LCM.

Software malfunction. Try disconnecting the battery power for at least 15 seconds and reprogramming the LCM. If the problem persists, replace the LCM.

Unknown LCM malfunction. Try disconnecting the battery power for at least 15 seconds and reprogramming the LCM. If the malfunction persists, replace the LCM.

The current at the LCM unit output to the lamp is less than 0.1 A. There is a break in the power wire between the LCM unit and the lamp, a break in the wire between the lamp and the ground point, or the lamp is faulty.

The current at the LCM output to the lamp is greater than 3.1 A. The wire between the LCM and the lamp is shorted to ground. Multiple lamps may be connected or a high-power lamp may be installed.

The current at the LCM unit output to the lamp is less than 0.1 A. There is a break in the power wire between the LCM unit and the lamp, a break in the wire between the lamp and the ground point, or the lamp is faulty.

The current at the LCM output to the lamp is greater than 3.1 A. The wire between the LCM and the lamp is shorted to ground. Multiple lamps may be connected or a high-power lamp may be installed.

The current at the LCM unit output to the lamp is less than 0.1 A. There is a break in the power wire between the LCM unit and the lamp, a break in the wire between the lamp and the ground point, or the lamp is faulty.

The current at the LCM output to the lamp is greater than 3.1 A. The wire between the LCM and the lamp is shorted to ground. Multiple lamps may be connected or a high-power lamp may be installed.

The current at the LCM unit output to the lamp is less than 0.1 A. There is a break in the power wire between the LCM unit and the lamp, a break in the wire between the lamp and the ground point, or the lamp is faulty.

The current at the LCM output to the lamp is greater than 3.1 A. The wire between the LCM and the lamp is shorted to ground. Multiple lamps may be connected or a high-power lamp may be installed.

The current output from the LCM to the lamps is less than 500 mA. There is a broken wire between the LCM and the lamps, a broken wire between the lamps and the ground point, or faulty lamps.

The current at the output of the LCM unit to the lamps is greater than 5.8 A. Short circuit to ground in the wire between the LCM unit and the lamps.

The current at the LCM unit output to the lamps is less than 0.1 A. There is a break in the power wire between the LCM unit and the lamps, a break in the wire between the lamps and the ground point, or the lamps are faulty.

The current at the output of the LCM unit to the lamps is greater than 3.5 A. Short circuit to ground in the wire between the LCM unit and the lamps.

The current output from the LCM to the lamps is less than 500 mA. There is a break in the wires between the LCM and the lamps, a break in the wire between the lamps and the ground point, or faulty lamps.

The current at the output of the LCM unit to the lamps is greater than 5.8 A. Short circuit to ground in the wire between the LCM unit and the lamps.