کدهای خطای MID 216

The current at the LCM output to the lamp is greater than 5.2 A. The wire between the LCM and the lamp is shorted to ground. Multiple lamps may be connected or a high-power lamp may be installed.

The voltage at the LCM output is equal to or greater than the LCM supply voltage. The wire between the LCM and the relay is shorted to the power wire.

The voltage at the output of the LCM unit is less than 2 V. The wire between the LCM unit and the relay is shorted to ground.

The voltage at the output from the LCM unit to the instrument panel exceeds 26 V. The wire between the LCM unit and the instrument panel lamps is shorted to the power wire.

The voltage at the output from the LCM unit to the instrument cluster is less than 2 V. There is a break in the wiring between the LCM unit and the instrument cluster, or a short circuit in the wire between the LCM unit and the instrument cluster lamps to ground.

The voltage at the LCM output is equal to or greater than the LCM supply voltage. The wire between the LCM and the lamps is shorted to the power supply wire. First, check all lamps.

The voltage at the output of the LCM unit is less than 2 V. The wires between the LCM unit and the lamps are shorted to ground.

The current at the LCM unit output to the lamps is less than 0.1 A. The wiring between the LCM unit and the lamps is broken or the lamps are faulty.

The current at the LCM output to the lamps is greater than 1.4 A. There is a short circuit in the wiring between the LCM and the lamps. Several additional lamps may be connected or higher-power lamps may be installed.

The voltage at the LCM output is equal to or greater than the LCM supply voltage. The wire between the LCM and the lamps is shorted to the power supply wire. First, check all lamps.

The voltage at the output of the LCM unit is less than 2 V. The wires between the LCM unit and the lamps are shorted to ground.

The current at the LCM unit output to the lamps is less than 0.1 A. The wiring between the LCM unit and the lamps is broken or the lamps are faulty.

The current at the LCM output to the lamps is greater than 1.4 A. There is a short circuit in the wiring between the LCM and the lamps. Several additional lamps may be connected or higher-power lamps may be installed.

The voltage at the LCM output is equal to or greater than the LCM supply voltage. The wire between the LCM and the lamps is shorted to the power supply wire. First, check all lamps.

The voltage at the output of the LCM unit is less than 2 V. The wires between the LCM unit and the lamps are shorted to ground.

The current at the LCM unit output to the lamps is less than 0.1 A. The wiring between the LCM unit and the lamps is broken or the lamps are faulty.

The current at the LCM output to the lamps is greater than 1.5 A. There is a short circuit in the wiring between the LCM and the lamps. Several additional lamps may be connected or higher-power lamps may be installed.

The voltage at the LCM output is equal to or greater than the LCM supply voltage. The wire between the LCM and the lamps is shorted to the power supply wire. First, check all lamps.

The voltage at the output of the LCM unit is less than 2 V. The wires between the LCM unit and the lamps are shorted to ground.

The current at the LCM unit output to the lamps is less than 0.1 A. The wiring between the LCM unit and the lamps is broken or the lamps are faulty.

The current at the LCM output to the lamps is greater than 1.5 A. There is a short circuit in the wiring between the LCM and the lamps. Several additional lamps may be connected or higher-power lamps may be installed.

The current at the LCM unit output to the lamps is less than 0.1 A. The wiring between the LCM unit and the lamps is broken or the lamps are faulty.

The current at the LCM output to the lamps is greater than 10 A. There is a short circuit in the wiring between the LCM and the lamps. Several additional lamps may be connected or higher-power lamps may be installed.

The current at the LCM unit output to the lamps is less than 0.1 A. The wiring between the LCM unit and the lamps is broken or the lamps are faulty.

The current at the LCM output to the lamps is greater than 10 A. There is a short circuit in the wiring between the LCM and the lamps. Several additional lamps may be connected or higher-power lamps may be installed.