جستجوی کد خطای ولوو و رنو تراکس

Parameters are programmed incorrectly. Check that the parameters are set correctly. Reprogram the ECS unit.

Parameters are programmed incorrectly. Check that the parameters are set correctly. Reprogram the ECS unit.

Parameters are programmed incorrectly. Check that the parameters are set correctly. Reprogram the ECS unit.

Parameters are programmed incorrectly. Check that the parameters are set correctly. Reprogram the ECS unit.

The supply voltage of the level sensors is higher than 5.5 V. The supply wire of the sensors is shorted to a higher voltage.

The supply voltage of the level sensors is below 4.5 V. The power wire is shorted to ground.

The supply voltage of the pressure sensors is higher than 5.5 V. The supply wire of the sensors is shorted to a higher voltage.

The supply voltage of the pressure sensors is below 3.5 V. The power supply wire is shorted to ground.

The supply voltage of the pressure sensors is higher than 16 V. The supply wire of the sensors is shorted to a higher voltage.

The air suspension control unit detects that the switch is in two positions simultaneously. There is a short circuit in the wires between the ECS unit and the switch, or the switch is faulty. Fuses and relays should also be checked.

The signal wire is shorted to ground, the ground wire is broken, or the sensor is faulty.

The voltage of the sensor signal wire exceeds 4.5 V. The signal wire is shorted to the power wire, the ground wire is broken, or the sensor is faulty.

The signal wire is shorted to ground. The power or signal wire is broken. The sensor may be faulty.

Low pressure measured by the sensor. Clogged air lines, short circuit in the signal wire to power, broken ground wire, or faulty sensor.

The signal wire is shorted to ground, the ground wire is broken, or the sensor is faulty.

The voltage of the sensor signal wire exceeds 4.5 V. The signal wire is shorted to the power wire, the ground wire is broken, or the sensor is faulty.

The signal wire is shorted to ground. The power or signal wire is broken. The sensor may be faulty.

Low pressure measured by the sensor. Clogged air lines, short circuit in the signal wire to power, broken ground wire, or faulty sensor.

The signal wire is shorted to ground, the ground wire is broken, or the sensor is faulty.

The voltage of the sensor signal wire exceeds 4.5 V. The signal wire is shorted to the power wire, the ground wire is broken, or the sensor is faulty.

The signal wire is shorted to ground. The power or signal wire is broken. The sensor may be faulty.

Low pressure measured by the sensor. Clogged air lines, short circuit in the signal wire to power, broken ground wire, or faulty sensor.

The signal wire is shorted to ground, the ground wire is broken, or the sensor is faulty.

The voltage of the sensor signal wire exceeds 4.5 V. The signal wire is shorted to the power wire, the ground wire is broken, or the sensor is faulty.

The signal wire is shorted to ground. The power or signal wire is broken. The sensor may be faulty.